45Z

45×52,4 mm continous louwre wall, the extruded aluminium
lamellas are fixed with clips.

The distance between the lamellas with fixed spacing is 50 mm.
Thanks to the simple but strong enough fixing, the weight of the
wall is only 10 kg/m2.

The maximum distance between the fixing clips are 1,4 meters.
Lamella cantileverness is maximum 0,4 meters.

The 40×40 mm clipholder profile is self supporting until 1,5
meters. Above this diameter special reinforcement needed

The ends of longitudinal louvre wall are covered with special
frame profile or sheeting. It is also possibile to cut the louvres at
an angle.

The louvres can be covered with bird and insect nets.

Due to its cross section, this lamella wall is excellently suitable
for installation in doors and windows, pressed down with glass
strips.

Material:EN 6063-T5 AlMgSiO.5

Technical details

Lamella allocation ( C ) 50,0 mm
Width (X ) : 47,0 mm
Height (Y ) : 52,4 mm
Visual free cross section : 71 %
Phisical free cross section : 60 %
Max. support span: 1,4 m
Max. lamella cantilever: 0,4 m
Max. lamella lenght: 6 m